Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Domenico, the 7308 loader is still available for the 1520, I just bought one last weekend for about $3500 at a dealer in michigan. That included the loader, frame, HD bucket and scv. It took about 6 hrs to get it all installed, the next one would take 3. The last step is to mount the bucket and wouldn't you know it, the moounting pins were missing. Back to the dealer today to get them.

Paul
.

Price on 1520 and TC29D
New Holland Tractors
Replies 8 Post by Paul Nakamura

Ed, you need to crank the starter while the injector pipes are loose until fuel sprays out (beware of high pressure fuel spraying out, it can pierce your skin). I'm not familiar with your particular machine, but I'll give you some general tips on bleeding. Most systems are gravity fed to a certain point, (fuel filter or lift pump) pull the hose off and see that fuel comes out. From there you'll need to bleed every component in the system (lift pump, FI pump, injectors and ?) by loosening each fitting (half turn or so) as you work towards the injectors and cranking until fuel comes out.
I think running out of fuel is something you only do once, you'll never want to do it again :-)

Good Luck,

Paul
.

Ran out of Diesel filled it up and now it won 039t start
Cub Cadet
Replies 20 Post by Paul Nakamura

That price makes me feel bad about what I paid for my 1620, I'd jump on it.

Paul
.

Price Check - 03998 NH 1630 Hydro FEL 72 quot Belly
New Holland Tractors
Replies 2 Post by Paul Nakamura

I bought my 1994 1620 4 months ago, it came with a 60" mid mower and a 60" back blade. 105 hours on it, turf tires $11,000. the cab and front loader are expensive options that boost the value, conversely 1500 hours is getting up there. I like mine, only wish it had the 72" mower deck.
.
Paul
.

Advice on Ford 1620
Parts and Repair
Replies 2 Post by Paul Nakamura

I used a suction device to remove the old lube through the fill hole.

Paul
.

Mid Mower Gearbox Fluid change help- NH 914A
Mowers Field and Finish
Replies 3 Post by Paul Nakamura

I have a Ford 1620 which I believe is the same chassis as the 1320 and like you found that I couldn't fit the nice 13.6-16 tire chains I got from tirechains.com because of clearance problems on the inside of the tire (rear only). I turned the tire/rim around (inside out) and was able to fit the standard chain. The valve stem now faces inwards instead of out. YMMV

Paul
.

Tire chains for my JD 4400
Parts and Repair
Replies 20 Post by Paul nakamura